WUKO Lock’n’Roller 1040

Function:

Tool for closing the single-lock standing seam

Closes the profile in both directions
Clever system of eccentric lever with disc springs
adjustment of the pressure if necessary > clean and precise result regardless of material
Simple removal of the tool from seam by relieving pressure – at any time and without scratching
Ergonomic handholds above and on both sides of the tool
Forming rollers of stainless steel
Rope-tying device included
Carrying case included

link

Technical Data

Maximum sheet metal thickness:
Galvanized steel: 0.65 mm/0.025″
Aluminium, copper, zinc: 0.80 mm/0.031″
Stainless steel: 0.50 mm/0.020″
Width of the profile: 12–15 mm/0.47″-0.59″
Tool length: 270 mm/10.6″
Weight: 2.9 kg/5 lbs

Profile

Close a short piece of seam e.g. with pliers
Place the WUKO Lock’n’Roller on the seam, adjust to seam width, fix with wing screws
Move the WUKO Lock’n’Roller forward (using handholds, handle bars or rope)
Move the WUKO Lock’n’Roller forward (using handholds, handle bars or rope)
If necessary increase or reduce contact pressure with the eccentric lever
Removing the WUKO Lock’n’Roller from the seam
- drive out at the end of the seam
- at any time by opening the eccentric lever (relieving of pressure) and loosening the wing screws

Just combine two holders of forming rollers.